Mitsubishi HL7925K Series User Manual page 21

(
CONTROLS LOCATION AND DESCRIPTION )
CAHNNEL DESCRIPTION
AUTO CHANNEL This CHANNEL has 15 bands for horizontal frequency of 30 - 78 kHz and
(CH 0) picture data can be memorized in each band.
ENHANCED
CHANNEL
(CH 1 - CH 9)
(1) IN OPERATION MODE
When in OPERATION MODE, monitor displays the picture with the
size and position as memorized in the band corresponding with the
horizontal frequency of input sync. signal.
(2) IN ADJUSTMENT MODE
In case of pre-setting the new picture dimensions, the data concerned is
memorized in the band corresponding with the horizontal frequency of
input sync. signal. Difference between adjacent each horizontal fre-
quency hsould be kept 3 kHz or more, because horizontal frequency
which monitor counts has little discrepancy from that of input signal.
This ENHANCED CHANNEL has 9 CHANNELs and 1 (one) specified
timing can be memorized in each CHANNEL.
(1) IN OPERATION MODE
When horizontal frequency of input signal matches that of selected
CHANNEL, monitor displays the picture of the size and position as
memorized in the selected CHANNEL.
When horizontal frequency of input signal is different from that of
selected CHANNEL, monitor displays the picture of the size and position
which is memorized in the band of AUTO CH ANN EL (CH
O)
corres- .
ponding to the horizontal frequency of input sync. signal.
(2) IN ADJUSTMENT MODE
In case of pre-setting the new picture dimensions, the data concerned
is memorized in selected CHANNEL.
In CH 1 to CH 7, the timing which customer requests can be memorized.
In CH 8 the following timings are memorized at factory.
CH 8 : IBM VGA mode
20