1.3
Installation Procedure
Follow these steps to install and re-assemble the AlphaServer DS25 Model B
system.
3
2
4
5
1
2
1. Find the four threaded standoffs
supply backplane. Slip four tubular spacers
2. Position the new 500-watt power supply backplane
spacers on the right side while holding the left side out away from the
�
center wall of the enclosure. Connect the 3-pin and 4-pin Mate-N-Lok
connectors
to the mating connectors
backplane assembly.
1-6
AlphaServer DS25 Field Upgrade to DS25 Model B
2
2
�
that were used to mount the old power
�
that are part of the new
�
over these four standoffs.
�
over and on top of the
MR0492