Operation; Watch The Connected Video Source; Change Picture Format; Osd Menu - Philips 32BDL4031D User Manual

4.

Operation

NOTE: The control button described in this section is mainly on the
remote control unless specified otherwise.
4.1.

Watch the Connected Video Source

1. Press the [ ] SOURCE button.
2. Press [ ] or [ ] button to select a device, then press [
4.2.

Change Picture Format

You can change the picture format to suit the video source. Each video
source has its available picture formats.
The available picture formats depend on the video source:
1. Press [ ] FORMAT button to select a picture format.
• PC mode: {Full} / {4:3} / {Real} / {21:9}/ {Custom}.
• Video mode: {Full} / {4:3} / {Real} / {21:9}/ {Custom}.
5.

OSD Menu

An overall view of the On-Screen Display (OSD) structure is shown
below. You can use it as a reference for further adjustment of your
display.
5.1.

Navigating the OSD Menu

5.1.1. Navigating the OSD menu using the
remote control
SOURCE
LIST
ADJUST
1. Press [ ] button on the remote control to display the OSD menu.
2. Press [ ] or [ ] button to choose the item you want to adjust.
3. Press [OK] or [ ] button to enter the submenu.
4. In the submenu, press [ ] or [ ] button to toggle among items, press
[ ] or [ ] button to adjust settings. If there is a submenu, press
[OK] or [ ] button to enter the submenu.
5. Press [ ] button to return to the previous menu, or press [
button to exit the OSD menu.
NOTES:
• When there is no OSD menu on the screen, press [ ] to display the
menu of {Smart picture}.
• When there is no OSD menu on the screen, press [ ] to display the
menu of {Audio source}.
] button.
FORMAT
INFO
OPTIONS
]
5.1.2. Navigating the OSD menu using the
display's control buttons
1. Press [MENU] button to display the OSD menu.
2. Press [ ] or [ ] button to choose the item you want to adjust.
3. Press [ ] button to enter the submenu.
4. In the submenu, press [
press [ ] or [ ] button to adjust settings. If there is a submenu,
press [ ] button to enter the submenu.
5. Press [MENU] button to return to the previous menu, or press
[MENU] button several times to exit the OSD menu.
5.2.

OSD Menu Overview

5.2.1. Picture menu
Brightness
Picture
Contrast
Sharpness
Screen
Black level
Tint
Audio
Color
Noise reduction
PIP
P
Gamma selection
Color temperature
Con guration 1
Color control
Brightness(Picture)
Adjust the overall image and background screen brightness(backlight).
Contrast
Adjust the image contrast ratio for the input signal.
Sharpness
This function is digitally capable to keep crisp image at any timings.
It is adjustable to get a distinct image or a soft one as you prefer and set
independently for each
picture mode.
Black level
Adjust the image brightness for the background.
NOTE: sRGB picture mode is standard and cannot be changed.
Tint(Hue)
Adjust the tint of the screen.
Press + button the flesh tone color becomes greenish.
Press - button the flesh tone color becomes purplish.
NOTE: VIDEO mode only.
Color(Saturation)
Adjust the color of the screen.
Press + button to increase color depth.
Press - button to decrease color depth.
NOTE: VIDEO mode only
Noise Reduction
Adjust the noise reduction level.
19
] or [ ] button to toggle among items,
Medium
Native
Native
50
50
50
50