3.4.2. Digital video connection
Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2.
DISPLAY 1
DISPLAY 2
PC
[DP]
[DP IN]
[DP OUT]
[DP IN]
Connect the [DVI OUT] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2.
DISPLAY 1
DISPLAY 2
PC
[DVI]
[DVI IN]
[DVI OUT]
[DVI IN]
3.5.
IR connection
External
IR Receiver
DISPLAY 1
DISPLAY 2
[IR IN]
[IR IN]
[IR OUT]
DISPLAY 1
DISPLAY 2
[RS-232C OUT]
[RS-232C IN]
NOTE:
1. The remote control sensor of this display will stop working if the [IR IN] is connected.
2. IR loop through connection can support up to 9 displays.
3. IR in daisy chain via RS232 connection can support up to 9 displays.
17