Mounting On A Wall - Philips 32BDL4031D User Manual

1.5.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that
complied with TUV-GS and /or UL1678 standard in North America.
32BDL4031D
VESA Grid
Table
49BDL4031D
VESA Grid
Table
1. Prepare a flat and horizontal surface that is larger than the display and spread a thick protective sheet on it to facilitate your operation without
scratching the screen.
2. Ensure you have all accessories for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result in damage to the
equipment, or injury to the user or installer. The product warranty does not cover the damage caused by improper installation.
4. For the wall-mounting kit, use the M6 mounting screws (with a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely.
5. The equipment and its associated mounting facilities still remain secure during the test. Use only the UL listed Wall Mount Bracket with a minimum
weight/load of the weight of the unit without base.
1.5.1. VESA Grid
32BDL4031D
43BDL4031D
49BDL4031D
55BDL4031D
1.5.2. Weight of the unit
32BDL4031D
43BDL4031D
49BDL4031D
55BDL4031D
Protective Sheet
Protective Sheet
200(H) x 200(V) mm
400(H) x 400(V) mm
400(H) x 400(V) mm
400(H) x 400(V) mm
6.15 kg
10.4 kg
14.8 kg
18.0 kg
43BDL4031D
VESA Grid
Table
55BDL4031D
VESA Grid
Table
5
Protective Sheet
Protective Sheet