Before installing the display
•
This product is packed in a carton, together with the standard accessories.
•
Any other optional accessories will be packed separately.
•
Move the display by at least two (2) adults.
•
After opening the carton, ensure that the contents are complete and in good condition.
1.2.
Package Contents
Please verify that you received the following items with your package content:
•
LCD display
•
Quick start guide
•
Remote Control and AAA batteries
•
Power cord
•
RS232 cable
•
RS232 daisy chain cable
•
Logo
•
Edge Alignment Kit-1: 2PCS
•
Edge Alignment Kit-2: 1PCS
•
Thumb Screw: 8PCS
NOTES:
•
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
•
Keep the packaging materials appropriately after unpacking the product.
1.3.
Installation Notes
•
Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
•
The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product and the wall for proper
ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to do so may shorten the life of the internal
parts.
•
Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
* The supplied power cord varies depending on destination.
Power Cord
Logo
Thumb Screw x 8
* Items may differ in different locations
* Display design and accessories may differ from the images shown..
2
Quick start guide
RS232 Cable
RS232 Daisy Chain Cable
Edge Alignment Kit-1 x 2
2
should be used).
NORMAL
ID
SOURCE
FORMAT
LIST
INFO
ADJUST
OPTIONS
VOL
ID SET
ENTER
Remote Control
and AAA Batteries
Edge Alignment Kit-2 x 1