Table of Contents
Advertisement
Operation
Audio connection An audio voice link is only possible between one transmitter and
one receiver. The
maximum of 5 simultaneously connected receivers, whereby an
audio voice link is only possible to the first receiver (the first connec-
tion set up). The remaining receivers can only hear (audio signals
are transmitted from the transmitter unit but not from the receivers).
You establish the voice connection with the [F12] key. The connec-
tions lasts as long as the key [F12] is pressed. In the status line of
the browser window the message Send Audio on is shown.
Press the key [F12] and speak into the microphone.
Release the key [F12] to tear down the audio connection.
64
VideoJet 400 supports multilink mode with a
VideoJet 400
Advertisement
Table of Contents
