Table of Contents
Advertisement
Configuration with web browser
Password level:
The access to a
password in order to prevent unauthorised use of the device. The
transmitters operate with two authorisation levels, Service and
User.
In the authorisation level Service, you can change all the configu-
ration settings after entering the corresponding password. With the
authorisation level User you can operate but not configure the
device. You can have a live picture or the configuration settings dis-
played, but you cannot change them.
Password:
You can define and change passwords for access to the device
when you are working with the authorisation level Service or if the
device is not protected with a password.
Confirm password:
Enter the new password again to rule out the risk of typing errors. If
the device is not protected with a password, No password set will
be displayed
Note
You can always change only one of the two passwords. In order to
change the other password, you have to call up the configuration
page Identification again.
Language
Help menu language:
selection
Here you can select the 'Help' page language.
Date and time
Date format:
Select the required date format
(Europe: TT.MM.JJJJ; USA: MM.TT.JJJJ).
Date:
Enter the current date here. As the system time is controlled by the
internal calendar clock, the day of the week does not have to be
entered. It is added automatically.
36
VideoJet 400 is generally protected with a
VideoJet 400
Advertisement
Table of Contents
