Locate The Bottom Track - Sterling Bypass Shower Doors 5400 Series Installation And Care Manual

Bypass shower doors
Table of Contents

Advertisement

Mida y corte el carril inferior (cont.)
Lime el filo áspero del corte del carril inferior, teniendo cuidado de no dañar la
superficie acabada.
NOTA: Si hay curvas donde las paredes laterales se juntan con el umbral, utilice una
lima para contornear los filos del carril inferior para que correspondan con las curvas.
2.

Locate the Bottom Track

Leg Faces Outside of Shower.
Pieds orientés vers l'extérieur de la douche.
La pata queda hacia el exterior de la ducha.
Bottom Track
Rail inférieur
Carril inferior
Install the bottom track on the threshold.
Temporarily secure the bottom track to the ledge with masking tape.
NOTE: The bottom track must sit flat. If the bath/shower ledge has a curve in the
corners or is constructed of fiberglass, it may be necessary to shape the ends of the
track with a file.
Place the bottom track on the flattest part of the bath/shower ledge with the leg
toward the outside of the shower.
Position the bottom track so there is an equal gap between each wall and the ends
of the bottom track.
Temporarily secure the bottom track to the ledge with masking tape.
Mark the ledge along the front edge of the bottom track with a soft pencil.
1063216-2-L
8
Sterling

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5400 series

Table of Contents