Install The Towel Bar - Sterling Bypass Shower Doors 5400 Series Installation And Care Manual

11.

Install the Towel Bar

1/4 x 20 Screw
Vis 1/4 x 20
Tornillo de 1/4 x 20
Towel Bar
Porte-serviettes
Toallero de barra
Insert a small hex wrench into hole in screw
head and turn clockwise to secure towel bar.
Insérer une petite clé hexagonale dans
l'orifice de la tête de la vis et tourner vers la
droite pour sécuriser le porte-serviettes.
Introduzca una llave hexagonal pequeña en
el orificio de la cabeza del tornillo y gire
hacia la derecha para fijar el toallero.
Place a spacer onto each 1/4 x 20 screw.
From the inside of the outside panel, insert a screw into each mounting hole in the
panel.
Slide a spacer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align
the second end of the towel bar, and finger tighten the screw.
Insert a small hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
1063216-2-L
Spacer
Espaceur
Espaciador
Spacer
Espaceur
Espaciador
24 Sterling