Reconnecting Cables And Terminators - Digital Equipment VAX 4000 Model 100 Upgrade Instructions

30. Reconnect the DSSI connectors to the drives (see Figure 2–6).
31. Reconnect the internal power cables (see Figure 2–5).
32. Reinstall the enclosure cover (see Figure 2–3).
33. Reconnect cables and terminators to the DSSI, Q–bus, and SCSI connectors
on the port cover as desired (see Figure 2–30).
Figure 2–30 Reconnecting Cables and Terminators
1
3
2
2
DSSI connector/terminator
Q–bus connectors
SCSI connector/terminator
¡
Upgrading the VAX 4000 Model 100 System
2.5 Replacing the CPU Module
1
3
Upgrading the VAX 4000 Model 100 System 2–37
MLO-012310