Digital Equipment VAXstation VLC Upgrade Instructions page 5

Check the SCSI ID Settings
If your DEC 3000 system has factory-
installed drives, check the SCSI ID settings
on the drives you are upgrading.
To find out the SCSI ID settings on your
VAXstation drives, enter these commands:
• To shut down your system software:
$ SYS$SYSTEM:SHUTDOWN
• To show the drives and their SCSI ID
settings: >> SHOW CONFIG
A screen similar to this will display:
>>> SHOW CONFIG
KA48-A V1.3-343-V4.0
08-00-2B-1D-28-6C
8MB
DEVNBR DEVNAM INFO
------ ------ --------------------------------
1 NVR OK
2 LCG OK
LR - 8 PLN FB - 5.2
3 DZ OK
4 CACHE OK
5 MEM OK
8MB = S0/1=0MB, S2/3=0MB, S4/5=0MB
6 FPU OK
7 IT OK
8 SYS OK
9 NI OK
10 SCSI OK
5-RX26 6-INITR
11 AUD OK
>>>
SCSI
ID Numbers
Write your system drive names and SCSI ID
settings here:
MLO-010730