Dock Ejector; Front View; Rear View - OWC Mercury Elite Pro Dock Assembly Manual & User Manual

1.4 OWC Dock Ejector
This application safely ejects all drives connected to the Mercury Elite Pro Dock with a single click, adding
peace of mind to fast-paced mobile workflows. To install this app, please follow the steps below.
1. Download the installer file: For Mac
download.owcdigital.com/dockejector/win
2. Launch the installer and follow the prompts. No restart is required.
3. Once the app is running an icon like the one shown below will appear in the macOS menubar, or, System
Tray on Windows.
To learn more about OWC Dock Ejector please visit: go.owcdigital.com/dockejector.

1.5 Front View

1. Drive A LED – will blink red for disk errors or missing disks, will blink green during
normal activity.
2. Power LED – solid white when connected to power and solid blue when
connected to both power and an active host.
3. Drive B LED – will blink red for disk errors or missing disks, will blink green during
normal activity.
4. SD card reader – Connect a compatible, formatted SD card type here.
1
2
7
6
5
OWC Mercury Elite Pro Dock
download.owcdigital.com/dockejector/mac

1.6 Rear View

1. USB 3.1 Gen 1 hub ports – Connect bus-powered USB 3.1 Gen 1 devices here.
2. Ethernet port – Left LED will show Green for 10M or 100M connection, Orange for
1G connection; Right LED will show Green for an established link and blink green
during network activity.
3. Security slot
3
4. RAID selector dial (internal access only) – See Sections 2.1 and 2.2 for details.
5. DC IN – connect power adapter here
4
6. DisplayPort – Connect a DisplayPort display here.
7. Thunderbolt 3 ports – 40Gb/s, 27W Power Delivery to host or 15W Power
Delivery to chained device.
3
or for Windows
1
2
3
4
Introduction