Honeywell ZG 215N Operation And Putting Into Service page 18

Examples
Selector knob P2
Room temp. [°C]
If no temperature selector is available, the desired room tempera -
ture can be set only on the setting knob
Par ty switch
The temperature selector's party switch has the following settings:
auto
automatic change to day mode or reduced mode
according to the timer
manual day mode, timer not active
manual night mode, timer not active
(the "night" duration mode is possible only if the
hours are set.)
If, for example, the heating is to stay open longer, the
Partyswitch is to be set on manual day mode.
Do not forget to switch back if the automatic mode is
to be activated again later on.
-1
19
S1
TF 22
0 +1 +2
20 21 22
B
of the control unit.
TW 23A
20 21 22 23
20 21 22 23