Honeywell ZG 215N Operation And Putting Into Service page 10

In order to make sure that the rooms are heated well in the morning,
the heating system's day mode should be activated between half an
hour and an hour before using the rooms.
Energy saving tip: Reduced mode can be activated up
to an hour before the room is left. The storage capaci -
ty of the heating system and building is enough to
keep the rooms warm for some time.
Timer with day program
The day program is repeated every 24 hours. If a (second) decrease
in temperature is desired in the course of the day to save energy, the
program needs to be extended. Take the extra trip pins
them at the desired time.
Example:
Desired time program
Normal temperature:
6:00 h to 8:00 h and 16:00 h to 22:00 h night decrease:
22:00 h to 6:00 h
day decrease: 8:00 h to 16:00 h
Position of the trip pins:
red pin
blue pin
red pin
blue pin
6:00 h – Start day mode (normal temperature)
8:00 h – Start day decrease
16:00 h – Start day mode (normal temperature)
22:00 h – Start night decrease
4
and insert