Two Notes Le Preamp Series User Manual page 9

2018/06/06 14:03
You will find in this table a description of the volume, tone and channel selection options.
This footswitch activates the clean Channel A or changes the page/parameter in
Channel A
1 MIDI programming. If the Channel A is already selected, pressing a second time
footswitch
will put your Le Preamp in bypass mode
Determines the amount of gain for your clean tone. Increasing the gain can lead
to more signal distortion, and even unwanted clipping. Adjust that parameter to
Channel A
2 your taste, the gain level you will be getting depends on Le Preamp, but also on
Input Gain
your guitar/bass pickups level and the level of other products such as pedals you
may have inserted between your guitar and Le Preamp.
Channel A EQ The Channel A features a passive Bass (low frequency) and Treble (high
3
settings frequency) voicing section.
Determines the output volume of the channel A, the volume is located pre-FX
Channel A Loop. This knob is inactive in Fusion mode. In case you hear unwanted clipping,
4
volume try lowering the volume too and make sure the following device in your signal
path is not overdriven.
User's manuals - http://wiki.two-notes.com/
9/21 Le Preamp Series User's Manual