Boot Configuration; Fast Boot [Enabled]; Boot Logo Display [Auto]; Post Delay Time [3 Sec] - Asus PRIME Z390-P Manual

2.8.1

Boot Configuration

Fast Boot [Enabled]

[Enabled]
[Disabled]
The following item appears only when you set Fast Boot to [Enabled].
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]

Boot Logo Display [Auto]

[Auto]
[Full Screen]
[Disabled]

POST Delay Time [3 sec]

This item appears only when you set Boot Logo Display to [Auto] and [Full Screen]. This item
allows you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. The values range from 0 to
10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until Press
ESC].
Bootup NumLock State [On]
This item allows you to enable or disable power-on state of the NumLock. Configuration
options: [On] [Off]
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs. Configuration options:
[Disabled] [Enabled]
2-42
Select to accelerate the boot speed.
Select to go back to normal boot speed.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Adjusts logo automatically based on Windows
Maximize the boot logo size.
Hide the logo during POST.
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
display requirements.
®
Chapter 2: Getting started