Tweaker’s Paradise; Cpu Core/Cache Current Limit Max. [Auto]; Short Duration Package Power Limit [Auto]; Ia Dc Load Line [Auto] - Asus PRIME Z390-P Manual

Short Duration Package Power Limit [Auto]

Also known as Power Limit 2, this item allows you to provide rapid protection when
the package power exceeds the Power Limit 1. Use the <+> or <-> keys to adjust the
value. The values range from 1 W to 4095 W.
IA AC Load Line [Auto]
This item allows you to set the AC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value. Configuration options: [Auto] [0.01] - [62.49]

IA DC Load Line [Auto]

This item allows you to set the DC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value. Configuration options: [Auto] [0.01] - [62.49]
2.5.12 Tweaker's Paradise
The subitems in this menu allow you to set the FCLK frequency and internal PLL voltage.
Realtime Memory Timing [Disabled]
When enabled, the system will allow to perform realtime memory timing changes after
MRC_DONE. Configuration options: [Disabled] [Enabled]
FCLK Frequency [Auto]
Allows you to set the value of FCLK Frequency. Configuration options: [Auto] [Normal
(800Mhz)] [1GHz] [400MHz].
VPPDDR Voltage [Auto]
Allows you to configure the voltage for the VPPDDR. Use the <+> or <-> keys to adjust
the value. The values range from 1.800V to 3.200V with a 0.010V interval.
Internal PLL Voltage [Auto]
Allows you to configure the offset for the Core PLL VCC Trim. Use the <+> or <-> keys
to adjust the value. The values range from 0.900V to 1.845V with a 0.015V interval.
GT PLL Voltage [Auto]
Allows you to configure the offset for the GT PLL VCC Trim. Use the <+> or <-> keys
to adjust the value. The values range from 0.900V to 1.845V with a 0.015V interval.
Ring PLL Voltage [Auto]
Allows you to configure the offset for the Ring PLL VCC Trim. Use the <+> or <-> keys
to adjust the value. The values range from 0.900V to 1.845V with a 0.015V interval.
System Agent PLL Voltage [Auto]
Allows you to configure the offset for the System Agent PLL VCC Trim. Use the <+> or
<-> keys to adjust the value. The values range from 0.900V to 1.845V with a 0.015V
interval.
Memory Controller PLL Voltage [Auto]
Allows you to configure the offset for the Memory Controller PLL VCC Trim. Use the
<+> or <-> keys to adjust the value. The values range from 0.900V to 1.845V with a
0.015V interval.
2.5.13

CPU Core/Cache Current Limit Max. [Auto]

This item allows you to configure a higher current limit to prevent a frequency or power
throttling when overclocking. Use the <+> and <-> keys to adjust the value. Configuration
options: [Auto] [0.00] - [255.50]
ASUS PRIME Z390-P 2-25