Cleaning And Maintenance; Cleaning My Watch; Replacing The Battery; Replacing The Wristband - Withings Move Installation And Operating Instructions Manual

Cleaning and maintenance

Cleaning my watch

1. Use a lint-free cloth moistened with water to clean the glass and casing of
your Withings Move.
2. Run the silicone band under water and rub it with hypoallergenic soap to clean
it.
3. Dry the silicone wristband with a soft cloth.

Replacing the battery

The battery needs to be replaced when the hands stop moving and when the
watch no longer vibrates when you press the button. The Withings Move will run
for approximately 18 months on a standard watch battery.
We recommend to go to a watchmaker if you want to install a new CR2430
battery. If the time does not seem correct after replacing the battery, you may
need to recalibrate the hands of your Withings Move.
Refer to "Calibrating the hands" on page 45

Replacing the wristband

You can easily replace the wristband of your Withings Move thanks to the quick
release spring bars with which it is attached.
To change the wristband, perform the following steps:
1. Turn your Withings Move over.
2. Locate the knob of each spring bar.
3. Pull the knob of the first spring bar to the left side and remove the wristband.
Withings Move
v1.0 | January, 2019
for more information.
EN - 4 4