Honeywell ZG 215VN Operation And Putting Into Service page 19

Instructions for the Technician (only!)
Removing the Timer
(see also the installation instructions)
Operating steps:
n
1. Pull out the instructions case.
n
2. Hold the timer by the two white stems and turn to the left
until the connector is released.
n
3. Remove the timer.
(To install the timer proceed in the opposite order.)
Regulation Stability (Sensitivity)
The stability of the regulation can be modified with the setting
potentiometer
For the regulation technician:
P1
By means of
Recommended basic setting:
In case of unstable regulation set higher values.
P1
.
, set the proportional range of the PD control unit.
è
P1 10.