Connections - Panasonic AW-RP655N Operating Instructions Manual

Connections

Turn off the power of all components before
proceeding with the connections.
O Use the AW-PS505A (sold separately) AC adapter for
this unit and the AW-PS300A (sold separately) for the
pan/tilt head.
O Use a DC power cable (which has a nominal cross-
sectional area of at least 1.25 mm
with the Electrical Appliance and Material Control Law) to
connect the AW-PH350 pan/tilt head and AW-PS300A
AC adapter.
The maximum extension distance between the AC
adapter for the pan/tilt head and the pan/tilt head itself is
30 meters.
O Connect the AW-PH350 pan/tilt head and convertible
camera using the composite camera cable (AW-CA50T29)
or component camera cable (AW-CA50C29).
O Connect the iris control cable of the motorized zoom lens
to the camera and the remote (zoom/focus control) cable
to the pan/tilt head.
For further details on how to connect each component,
refer to the operating instructions of the component
concerned.
2 and which complies
15