Device Label; Programming; Programming The Plc Cpu; Visualization - B&R PP21 User Manual

10. Device Label

The assignment for the plugs and the pin connectors are indicated on the device label.

11. Programming

11.1 Programming the PLC CPU

Programming the PLC CPU is done using Automation Studio™ or PG2000. Several
programming languages are available.
Automation Studio™
Automation Basic (previously PL2000)
ANSI C
IEC 1131 Ladder Diagram (LAD)
IEC 1131 Sequential Function Chart (SFC)
IEC 1131 Structured Text (ST)
IEC 1131 Instruction List (IL)

11.2 Visualization

The visualization application is created using B&R Automation Studio™.
Power Panel User's Manual
Figure 15: Device label
PG2000
Instruction List (IL)
Ladder Diagram (LAD)
PL2000 High Level Language (structured text)
Table 14: Programming languages
Power Panel • Device Label
33