Miele FNS 28463 E ed/cs Operating And Installation Instructions page 98

Changing the door hinging
 Use your fingers to insert pin  into
the door bearing bush.
 Screw in pin  (by approx. ¼ turn)
until it clicks into position.
 Fit safety cover  on to the pin.
The appliance door is not secure until
safety cover  has been correctly
fitted.
98
Secure the soft-close
mechanism
 Open the door 90°.
 Push on cover  until it clicks into
position.
 Push hinged arm  into the opening
on the door hinge.
 Insert pin  into the door hinge from
above. Turn this with a screwdriver
(by approx. ¼ turn) until both lugs on
the pin click into position correctly in
the grooves.
 Pull out red safety aid .
Tip: Keep the red safety aid in case you
want to change over the door hinging
again at a later date.