Installing The Appliance In A Run Of Kitchen Units - Miele FNS 28463 E ed/cs Operating And Installation Instructions

Installation
Installing the appliance in a run
of kitchen units

Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods. This will
result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the
ventilation gaps given.
 Top box
 Refrigeration appliance
 Kitchen furniture housing unit
 Wall
78
* The appliance depth is increased by
approx. 15 mm for appliances with
wall spacers fitted.
The appliance can be built into any run
of kitchen units and installed directly
next to a kitchen furniture housing unit.
The appliance front must protrude in
front of furniture fronts by at least
65 mm. This enables the doors to be
opened and shut without being
obstructed. To match the height of the
rest of the kitchen, the refrigeration
appliance can be fitted with a suitable
top box .
When installed next to a wall , a
distance of at least 40 mm must be
maintained on the hinge side between
the wall  and the refrigeration
appliance .
The larger the ventilation gap, the
more economically the compressor
will work.
– A ventilation gap with a depth of at
least 50 mm must be provided at the
back of the refrigeration appliance
across the whole width of the top box
to allow for venting.
– The ventilation gap under the ceiling
must be at least 300 cm
that warm air can escape without
obstruction.
2
to ensure