Panasonic WE-MV180A Service Manual page 17

8
Remove one screw that secure the LCD Monitor Ass'y and
remove the LCD Monitor Ass'y.
8
Referring to Fig. 6-7, remove four screws that secure the
LCD Rear Cover and remove the LCD Rear Cover.
LCD Rear Cover
Remove four screws.
8
Referring to Fig. 6-8, de-solder three wires (Red, Yellow
and White), and remove the LCD Monitor Ass'y.
Camera Unit
8
Referring to Fig. 6-9, remove four screws that secure the
Camera Cover.
LCD Monitor Ass'y
Remove one screw.
LCD Monitor Mounting Bracket
Fig. 6-6
Fig. 6-7
White
Red
Yellow
Fig. 6-8
Remove
four screws.
8
Referring to Fig. 6-10, disconnect the cable of the Main
Unit from CN2 on the Zoom Switch Board.
8
Release the Wire Clamper, remove four screws that
secure the Camera Unit with the Mounting Bracket and
remove the Camera Unit with the Mounting Bracket.
Wire Clamper
Remove
four screws.
8
Referring to Fig. 6-11, disconnect two connectors CN1
and CN3 on the Zoom Switch Board.
8
Remove two screws that secure the Zoom Switch Board
and remove the Zoom Switch Board.
CN1
CN3
8
Referring to Fig. 6-12, loosen two hexagon socket set
screws that secure the Camera Rotation Dial.
14
Camera Cover
Fig. 6-9
CN2
Zoom Switch
Board
Camera Unit with the
Mounting Bracket
Fig. 6-10
Remove
two screws.
Zoom Switch
Board.
Fig. 6-11