Ultra-Dry Setting; Lock Function; Memory Function; Centigrade - Fahrenheit - Seeley Braemar SDHVD1S Series Owner's Manual

OPERATION cont.

ULTRA-DRY SETTING

When in Dry mode and the setting
temperature is 16°C, press " " button
twice and the setting temperature will
be changed to 12°C, at this time, the
unit enters the "ULTRA-DRY" function.
The "ULTRA-DRY" function is
cancelled by pressing " " button or
pressing "Mode" button to switch
mode.

LOCK FUNCTION

Under the ON state of the unit without
any malfunction or under the OFF
state of the unit, press
buttons at the same time for 5s till the
wired controller enters the lock state
and the LCD displays
Press ▲ and ▼ buttons at the same
time for 5s to quit the lock state.
Under the lock state, pressing any
other buttons with give no response.

Memory Function:

In the OFF state, press the Mode and
▲ buttons at the same time for 5s to
switch to "MEMORY" mode.
"MEMORY" will be displayed, and
when the unit is ON, the wired
controller after power failure will
resume its original running state upon
power recovery.
Note: It takes 5s to save data.
Therefore, please do not cut down the
power at this time, or data will fail to be
saved.
If MEMORY function is not activated,
the unit will go to the OFF state after
power recovery.
▼
▲
▲ and ▼
.
SEELEY INTERNATIONAL - OWNER'S MANUAL
CENTRIGADE AND FAHRENHEIT
When the unit is OFF, press the Mode
and ▼ buttons at the same time for 5s.
Centigrade and Fahrenheit scales will
be switched alternately.

AMBIENT TEMPERATURE ENQUIRY

Under ON/OFF status, press "Confirm"
button for 5s to enter the Enquiry
interface. The timer area will display
the ambient temperature type: 01 or 02
and the temperature will be shown.
"01" means the outdoor ambient
temperature and "02" represents the
indoor ambient temperature. Press
"Mode" button to switch between those
two types.
Press any button (except for Mode) to
exit from the Enquiry function. If there
is no operation in 20s, the unit will quit
from this function automatically.
Notes:
1. If the unit is not fitted with an
ambient temperature sensor, after 12h
operation, the ambient temperature
mode will not be displayed.
2. If the outdoor temperature sensor
has an error, after 12h operation, the
display of the ambient temperature
sensor will be blocked.
27