Filter Setting - Seeley Braemar SDHVD1S Series Owner's Manual

OPERATION cont.
BLOW FUNCTION SETTING cont.
Notes:
1. When the "BLOW" function is
activated, if the unit is turned off
through the On/Off button, the indoor
fan will still run at low fan speed for
another 10 minutes. When the
"BLOW" function is deactivated, the
indoor fan will stop when the unit is
turned off.
2. The "BLOW" function is not
available in the FAN and HEAT modes.

FILTER SETTING

When the unit is ON, press "Function"
button to set "FILTER" function. With
"FILTER" icon flashing, the pollution
level will be shown at the Timer area.
▲ ▼
Press " " and " " to adjust pollution
level and press "Enter/Cancel" button
to activate "FILTER" function.
To cancel "FILTER" function:
When the "FILTER" function is set,
press "Function" button to select
"FILTER". With "FILTER" icon flashing,
▲ ▼
press " " and " " to adjust till "00" is
shown on the timer area. Then press
"Enter/Cancel" button to cancel the
"FILTER" function.
Press "Enter/
Cancel" button to
cancel BLOW
function
SEELEY INTERNATIONAL - OWNER'S MANUAL
FILTER SETTING cont.
"FILTER" function setting is shown
below.
Unit On, no
FILTER function
Press "Function"
button to set
FILTER function
▲ ▼
" or "
Press " "
button to set the
pollution level
23