I-Demand Setting - Seeley Braemar SDHVD1S Series Owner's Manual

OPERATION cont. OPERATION cont.
HEALTH SETTING cont. HEALTH SETTING cont.
Notes: Notes:
1. The health function can be 1. The health function can be
cancelled by turning off the unit. cancelled by turning off the unit.
2. The health function can not be 2. The health function can not be
cancelled by mode switching. cancelled by mode switching.
3. After the unit is resumed, health 3. After the unit is resumed, health
function will be maintained. function will be maintained.

I-DEMAND SETTING

I-DEMAND SETTING
Under cooling mode, press "Function" Under cooling mode, press "Function"
button to select I-Demand function with button to select I-Demand function with
"I-Demand" icon flashing. Press "I-Demand" icon flashing. Press
"Enter/Cancel" button to activate "Enter/Cancel" button to activate
I-Demand function. I-Demand function.
When I-Demand is on, press When I-Demand is on, press
"Function" button to set function, with "Function" button to set function, with
"I-Demand" icon flashing. Then press "I-Demand" icon flashing. Then press
the "Enter/Cancel" button to cancel the "Enter/Cancel" button to cancel
I-Demand function. I-Demand function.
I-Demand setting is as shown below. I-Demand setting is as shown below.
16
16
Unit On, no Unit On, no
I-DEMAND I-DEMAND
function function
SDHVD1S Series Inverter Unit
SDHV Series Ducted Inverter Unit
I-DEMAND SETTING cont. I-DEMAND SETTING cont.
Press "Function" Press "Function"
button to set button to set
I-DEMAND I-DEMAND
function function
Press "Enter/ Press "Enter/
Cancel" button to Cancel" button to
activate activate
I-DEMAND I-DEMAND
function function
Press "Function" Press "Function"
button to set button to set
I-DEMAND I-DEMAND
function function
Press "Enter/ Press "Enter/
Cancel" button to Cancel" button to
cancel I-DEMAND cancel I-DEMAND
function function