Table Of Contents - Rondo Rondostar 3000 Series Service Manual

1. Safety regulations
2. Full view of the machine
3. Recommended spare parts
3.1 Mecanical spare parts
3.2 Electrical spare parts
4. Notes for the service
4.1 Important notes
4.1.1 Improvements on the Rondostar
4.1.2 Software changes
4.1.3 Usage of the new software
4.1.4 General view of the special functions
4.2 Initialisation
4.3 Calibrating the roller gap
4.4 Parameter
4.5 Diagnostic program
4.5.1 Selecting the diagnostic program
4.5.2 Checking the inputs
4.5.3 Allocation of the outputs
4.6 Operating hours counter
5. Important notes, testing the drives
5.1 Mains voltage, mains frequency
5.1.1 Modifying the machine for a different mains voltage
5.1.2 Modifying the machine for another frequency
5.2 Functions of the machine
5.2.1 Machine start function
5.2.2 Roller adjustment drive function
5.2.3 Turning knob
5.3 Testing the drives
5.3.1 Direction of rotation of the drives
5.3.2 Testing the table- and roller drive
5.3.3 Testing the roller adjustment drive
5.3.4 Testing the flour duster
5.3.5 Testing the reeler
5.3.6 Testing the roller adjustment drive brake
5.3.7 Testing the Cutomat
5.4 Final control test
Index