Software Installation; Macintosh Installation - Solid State Logic Nucleus User Manual

3. Software Installation

In order for Nucleus to integrate into your working environment, it will be necessary to install drivers and supporting software
on your DAW computer(s) and/or studio computer(s). The following computers and operating systems are supported:
Macintosh
• Intel only, 1.2GHz or faster
• OS X Version 10.5.8 or greater ('Leopard' or 'Snow Leopard')
Windows
• Pentium IV or equivalent, 1GHz or faster
• Windows XP SP3, Vista SP1 or higher, or Windows 7 (32 or 64bit)
For all computers, the following resources are required:
• 512MB RAM
• 15MB Hard Disk space
• VGA colour screen (1024 x 768 pixels or higher)
• Internet connection (for product registration and software upgrade)
The ipMIDI and (optional) USB Soundcard drivers will be required for one or more DAW computers, Nucleus Remote can
either be installed onto one of the DAW computers or onto an entirely different computer if required.

Macintosh Installation

1. Insert the Nucleus CD included with your Nucleus unit into the
Macintosh CD-ROM drive – if necessary, use Finder to open a view
of the CD-ROM drive. You should be presented with a window
similar to that opposite.
Nucleus Remote
2. To install Nucleus Remote, simply drag the Nucleus Remote icon to
the Applications folder alias. This will copy the application onto the
computer.
3. To run Nucleus Remote, locate and double-click the Nucleus
Remote icon in the Applications folder. If required, drag this icon to
the Dock on the Desktop to provide quick and easy access.
4. If it is necessary to uninstall Nucleus Remote, simply locate the
Nucleus Remote icon in the Applications folder and drag it to the
Trash.
It is also possible to run Nucleus Remote directly from the CD.
ipMIDI Driver
If an older version of the ipMIDI driver is already present on the computer, it should be removed before running the
installer; simply delete the ipMIDIDriver.bundle file from the /Library/Audio/MIDI Drivers folder.
5. To install the ipMIDI driver, locate the ipMIDI package in the Finder window. Double-click this icon to launch the ipMIDI
installer. Follow the instructions in the installer (it should be safe to accept the defaults).
It will be necessary to log out and back in again after the driver has been installed.
Nucleus Owner's Manual Page 9