WMF combiNation F 8700 Series Operating Instructions Manual page 119

This setting then appears as a symbol in the display:
Press the soft key to confirm your selection.
OK
A programmed switching time can be cleared by pressing
the soft key.
C
If you use the Plus (up arrow) and Minus (down arrow)
keys in the "Action" column, after scrolling through the
setting options in Operating Time mode, you will
automatically move on to the setting options in other
modes, such as Cleaning mode (see chapter 10.1.3 on
page124), Preselection, (see chapter 10.1.2 on page 122) or
Self-service mode (see chapter 10.1.4 on page 125).
The column heading "Prg" denotes the 16 switching times
that can be set for each day. Once you have pressed the
soft key to confirm the desired action, all the programmed
switching times will automatically be arranged in
chronological order.
By pressing the "Clock i" soft key in the display as a
check, you can access the Timer Check directly (see
chapter 10.2 Timer check on page 127).
switch on
switch off
cleaning + off
OK
121