Changing The Unit Of Measure; Turning Off The Sound - DeWalt DW0165S User Manual

5.
Indicate that you want to subtract the next
E
measurement from this measurement.
• Click
• Click twice.------
6. Point the laser at the top of the tool toward the next
wall or object.
7. Click to measure the distance and subtract it
from the previous measurement.
8. View the difference between the two measurements
at the bottom of the display window (Figure

Changing the Unit of Measure

Once the current measurement is taken (the device is
not in Continuous Measure mode), you can set the unit
of measure to fractional ft (6'02"
decimal ft (6.21 ft), decimal inches (3.21 in), or meters
(1.894 m).
1.
Click .
2.
Click ft/m.
3.
Click the desired unit of measure.
• 0'00" 0/00
• 0" 0/00
• 0'00" ft
• 0.00 in
• 0.000 m
4.
Click to return to the previous screen.
Using Your DW0165S With
If you have a DW0165S, you can use its Bluetooth
capability to pair it with the D
application on your cell phone or tablet, and then record
accurate measurements in your floor plans.
1.
From either
the D WALT Tool Connect application to your cell
®
E
phone or tablet.
2. Using the D WALT
E
capture the room or space for which you want to
record the measurements, and build your floor plan.
8
twice.-------
), inches (74
9/16
WALT Tool Connect
®
E
or , download
Tool Connect application,
®
3.
On the DW0165S keypad, click
tool.
4.
If the Bluetooth
window (Figure
• Click
• Click
5. Use the D
your cell phone or tablet to the DW0165S.
6.
Use the DW0165S to measure each wall in the room
). or space captured in the floor plan, and sync the
C 6
measurements to the floor plan.
7.
Using the D
the floor plan.
Once you have saved the floor plan, you can export it to
in),
9/16
one of several different file formats, including PDF, DXF,
or JPG, and print it or email it to other people (your realtor,
home center, etc.).
"THE BLUETOOTH ® WORD MARK AND LOGOS ARE REGIS-
TERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND
ANY USE OF SUCH MARKS BY DEWALT INDUSTRIAL TOOL CO.
IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES
ARE THOSE OF THEIR RESPECTIVE OWNERS."

Turning Off the Sound

Each time you take a measurement, the tool will beep.
You can turn off the beeps.
1.
Click
2.
Click
3.
Click
®
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold
after 10 seconds, the tool will turn off.
• If you do not use the tool for 90 seconds, it will
automatically turn off.
®
icon does not appear on the display
), turn on Bluetooth
C 2
- get to Bluetooth option.
- select Bluetooth option.
WALT Tool Connect application to pair
®
E
WALT Tool Connect application, save
®
E
.
to display .
to return to the previous screen.
for 10 seconds. When you release
to turn on the
®
.