Gps Check; Gps Setup - Raymarine G-Series Installation Instruction

7.4 GPS check

Checking GPS operation
You can check that the GPS is functioning correctly using the chart
application.
1. Select the Chart page.
2. Check the screen.
With the chart displayed, you should see:
Your boat position (indicates a GPS fix). Your current position
is represented by a boat symbol or solid circle. Your position is
also displayed in the data bar under VES POS.
Note: A solid circle on the chart indicates that neither heading
nor Course Over Ground (COG) data is available.
108

7.5 GPS setup

The GPS setup options enable you to configure a connected GPS
receiver.
The Global Positioning System (GPS) is used to position your
vessel on the chart. You can set up your GPS receiver and check
its status from the GPS Status option in the Setup Menu. For each
tracked satellite, this screen provides the following information:
• Satellite number.
• Signal strength bar.
• Status.
• Azimuth angle.
• elevation angle.
• A sky-view to show the position of tracked satellites.
1
2
3
6
5
4
G-Series installation instructions