Raymarine G-Series Installation Instruction page 57

1. GVM video module.
2. SeaTalk hs switch.
3. G-Series and SeaTalk hs
4. S-Video source (for example, video camera).
5. S-Video connection (using the supplied R08274 S-Video
adaptor cable).
6. Stereo audio connection (using the supplied R08275 audio
cable). Only the S-Video and Composite 4 inputs support an
associated audio connection.
7. Composite video source (for example, video camera).
8. Illustration showing the labels for the video and audio
connections on the GVM video module.
Note: Each GVM400 video module supports 1 S-Video input, or
4 composite video inputs (reduced to 3 composite video inputs
if using S-Video input). If a thermal camera is connected to a
GVM video module no further video devices may be connected to
that GVM unit. The G-Series system supports a maximum of 3
GVM video modules, providing a total of 12 video inputs (less if
connecting S-Video or thermal camera devices).
Cables and connections
devices.
GPM processor audio connections
The audio for an S-Video / composite 4 video source is connected
to the GVM video module and sent via the SeaTalk
GPM processor unit, which features an audio output for connection
to your vessel's audio system.
1. GPM processor unit.
2. Audio connection to vessel's audio system.
Video cables
Cables for connecting video sources to the G-Series system.
Cable Part number
1.5 m (4.9 ft) S-Video R08274
adaptor cable
hs network to the
1
2
Notes
Supplied with the GVM
video module.
D11823-1
57