Advertisement
Precautions
Always clean the piston rods, remove mud, humidity and/or dust.
Always adjust the height of the set up, so that the camera is kept at a safe distance from the
ground or top.
When you add safety straps for the camera, make sure they're long enough to allow for the
shock absorbers total boom range. If the strap is too short, it will keep the arm of doing its job
and might result in damage and vibrations.
Always run a quick check before and after the shot to locate loose screws etc. Especially if
you're shooting in rough terrain.
Always make sure your gripping tubes and clamps are safely and securely configured, and
that the grip set up is safe.
When you store the Hybris shock absorber release tension of the springs.
In case of any further doubt, don´t hesitate to contact us!
IDEA VISION GmbH
Anzengruberstr. 16
83059 Kolbermoor
www.idea-vision.de
D-Germany
Phone: +49 (0)8031 9085795
contact@idea-vision.de
Advertisement
