Advertisement
Damping adjustment
Connect the Hybris Shock Absorber with any power supply
between 8-30 V DC.(drawing 1)
The cabel mini XLR to car supply is included in the Hybris kit.
You can control the Hybris manually or via the Hybris App:
Manually: The Hybris has 2 buttons with
a +/- sign(drawing 1),
that you can push to release or add resistance force on the
damping. (drawing 1)
App (Android/iOS): Connect your device (smartphone,
tablet, computer) via Bluetooth with the Hybris Shock
absorber. If the Bluetooth button is green you are
connected. The Hybris App has a bar for the vertical shock
absorption, that you can move to release or add
resistance force on the damping.
Download Android App:
apps/details?id=com.ideavision.qubelift
From the softest position, lift the total set up by booming the Hybris all the way up, and
force it with a sudden push to boom down and see its reaction. If the Hybris swings up and
down a few times after return to center, then the damping is adjusted too soft and you
need to add force. Add a few clicks on the dampener + button (manually) or pull the bar
to the right (App) and try again, repeat until the shock absorber swings only once when
forced and then it stops in center. Excessive swing is not ideal for the vertical stabilization.
Also, excessive force adjustment will make the boom action very stiff and make the shock
absorber less reactive.
That means that you need to be somewhere in between. That is also relative to the nature
of shot. If you intend to shoot on very rough terrain, for example, it's better to be adjusted
little stiffer than usual as the bumps will have more effect on the set up. If the road is flat
and smooth, you can have a little softer adjustment.
After your adjustment, make a quick test run and correct if necessary.
IDEA VISION GmbH
Anzengruberstr. 16
83059 Kolbermoor
D-Germany
Phone: +49 (0)8031 9085795
contact@idea-vision.de
https://play.google.com/store/
www.idea-vision.de
Advertisement
