Table of Contents
Advertisement
2.3
User Instruction
"Inserto seat" positioning system, set up and configured by the professional operator under his
responsibility, in accordance with the characteristics of design defined by the professional operator
for the specific user, is ready for use, after the check of the color of the skin.
If an individual custom seat has been prepared and set up as prescribed, it can not be used by
other user.
Any operation of removal, preparation or adjustment for the specific user, on the basis of a
prescription, have to be performed by a professional operator and those interventions get the
device customised.
The professional user has the charge and the responsibility to guarantee the efficacy and the
performances of the device.
2.3.1
System Transfer
Before starting this operation we strongly reccomend that the user / caregiver is shown the correct
method by a clinical professional / authorised dealer for reducing any possible danger.
when you want to proceed with any trasportation of the positioning system, it is necessary to:
•
leave the positioning system in position as it is if the supporting frame is a rigid one, and then
proceed with the transfer.
•
remove the positioning system if the supporting frame is foldable. In this case, please proceed in
the following way:
-
operate the parking brakes and make sure the wheelchair is locked;
-
unfasten any securing components on the positioning system wich could impede the removal;
-
take out any kind of hip guides, if they could impede the removal of the positioning system;
-
remove the positioning system from the supporting base taking care to preserve the hooks
and loops stripes;
-
proceed by folding the wheelchair.
•
To replace the seat on the supporting base, please perform as follows:
-
unfold the wheelchair;
-
operate the parking brakes and make sure the wheelchair is locked;
-
position the solid base (if present) on the wheelchair, taking care to verify it is locked;
-
position the positioning system on the base, taking care to verify the complete adhesion of the
hook and loops strip of the seat with respect to the support base (check the seat notches and the
label REAR POSTERIOR are positioned in the rear part);
-
proceed verifyng all adjustments.
INSTRUCTION MANUAL
www.versainserto.com
Page
05
Advertisement
Table of Contents
