Placing Into Service - versa INSERTO SEAT DOMINO Series Product Technical Specification

For an appropriate after-sale monitoring the device, or in the event of an accident during the
use, please refer to the instructions stated in the relevant chapter.
1 CLINICAL INFORMATION/DESTINATION OF USE
The clinical information of medical device are written in the technical data sheet attached
2 OPERATING INSTRUCTIONS
2.1 Packaging and trasportation
The original package contains the following components :
1) The pelvic positioning system
- a structural kit composed by a flat base/preshaped base of construction and several inserts;
- a kit of padding or a single padding;
- cover.
2) Additional inserts (based upon model);
3) labeling and instruction manual;
4) hooks and loops (velcro) for use on seat bases.
Upon delivery, please check the integrity of the package. Any irregularity must be reported on
the shipping document. Upon opening the package, please check for any damage, dents,
cuts, or lacerations. The presence of one of these conditions must be reported on the shipping
document.
After perfoming the above checks, if the product is not put into immediate use, we recommend
that it is repackaged and stored in a dry place and protected from the bad weather.
The above procedure is the responsibility of the clinical professional or authorised dealer who
will perform the adaptations.
handle with care
2.2

Placing into service

These operations must be performer by a clinical professional or authorised dealer
For an appropriate assembling of the positioning system, please read the technical sheet of the
product here attached.
INSTRUCTION MANUAL
recycle reading manual use
www.versainserto.com
keep dry
Page
04