Collet; Removal; Replacement - IBM 5114 Maintenance Information Manual

(
c
c
c
114
COLLET
Removal
1. Remove the diskette drive cover assembly (112).
2.
Remove the mounting screw
II
3.
Remove the collet assembly
II
along with the
parts on the collet assembly shaft.
4. Remove the clip
II
and the collet.
5. Inspect all parts for wear and install new parts as
needed.
Replacement
1.
Reinstall the collet and the clip
II.
2. Reinstall the remaining parts on the collet
assembly shaft in the order shown.
3. Reinstall the collet assembly
II
and the mounting
screw
II.
4.
Reinstall the diskette drive cover assembly (112).
D
Mounting Screw
II
Collet Assembly
II
Clip
II
Timing Pins
Tubing
Shim
Collet
Covers and Diskette Drive 2-19