Download Character Commands - Star Micronics LC24-10 User Manual

Select graphics mode
Mode
ASCII Decimal Hexadecimal
IBM
< ESC > "[" "g" nl
27 91 103 nl 1B SB 67 nl
n2 mO ml
m2
n2
m0 ml m2... n2 m0 ml m2...
Selects one of eight graphics modes depending on the value of m0 and
prints dot graphics in this mode. The graphic image is (nl + n2 x 256)
- 1 dots wide. See <ESC> "K" (for 8-bit graphics) or < FS> "Z"
(for 24-bit graphics) for information on ml, m2, . . .
m0
Graphics mode
0
8-bit Single-density ( 60 dots per inch)
1
8-bit Double-density
(120 dots per inch)
2
8-bit Double-density, double-speed
3 8-bit Quadruple-density (240 dots per inch)
8
24-bit Single-density ( 60 dots per inch)
9
24-bit Double-density (120 dots per inch)
11
24-bit Triple-density (180 dots per inch)
12 24-bit Hex-density (360 dots per inch)
Convert
graphics density
Mode ASCII
Decimal Hexadecimal
Both
< ESC > "?" n
m
27 63 n m 1B 3F
n m
Converts graphics defined by subsequent < ESC > "K", < ESC > "L",
< ESC > "Y" or < ESC > "Z" commands to a density mode defined
by <ESC>
"*,,. n is "K", "L", "Y" or "Z", indicating
the mode to be
converted. m is a code from < 0 > to < 4 > or < 6 > indicating one of
the modes of < ESC > "*".
DOWNLOAD CHARACTER COMMANDS
Copy standard characters from ROM into RAM
Mode ASCII
Decimal Hexadecimal
Std. < ESC > ":" CO> CO> CO> 27 58 0 0 0 1B 3A 00 00 00
IBM < FS > ":" CO> CO> CO>
28 58 0 0 0 1C 3A 00 00 00
Copies all the standard characters to the corresponding download char-
acter RAM area, overwriting any download data already present. Ignored
when DIP switch 2-l is ON.
81