Star Micronics LC24-10 User Manual page 80

Set page length to
n
inches
Mode ASCII Decimal
Hexadecimal
Both <ESC> "C" co> n 27 67 0
n
1B 43 00
n
Sets the page length to n inches, where
n
is between 1 and 22 in Standard
mode or between 1 and 127 in IBM mode. The current line becomes the
top of the page.
Set top margin
Mode ASCII Decimal Hexadecimal
Both <ESC > "c"
n
27 99
n
1B 63
n
Sets the top margin to n lines, where
n
is between 1 and 255. Printing
begins on the (n + 1)th line on the page.
Set bottom margin
--
Mode ASCII Decimal
Hexadecimal
Both
<ESC>
"N" n
21 78 n IB4E
n
Sets the bottom margin ton lines, where n is between 1 and 127 in Standard
mode or between 1 and 255 in IBM mode. The bottom margin is reset
when you change the page length.
Cancel top and bottom margins
Mode ASCII Decimal Hexadecimal
Both
<ESC> "0"
21 19 1B 4F
Cancels both the top margin and the bottom margin.
Form feed
Mode ASCII Decimal Hexadecimal
Both <FF> 12
oc
Feeds the paper to the top of the next page according to the current page
-
length, and moves the print position to the left margin. When the auto-
matic sheet feeder (ASF) is selected (DIP switch l-4 is OFF), this com-
mand ejects the current page.
Return to top of current page
Mode ASCII Decimal Hexadecimal
Both <ESC> <FF> 27 12 1B OC
Feeds the paper backward to the top of the current page. Ignored when
friction feed is used.
72