Graphics Commands - Star Micronics LC24-10 User Manual

GRAPHICS COMMANDS
Print 8-M sing/e-density graphics
Mode
ASCII Decimal Hexadecimal
<ESC>
"K" nl
n2
27 75
nl n2
1B 4B nl
n2
Both
ml m2 ml m2 ml m2
Prints 8-bit dot graphics at 60 dots per inch horizontally. The graphic
image is 8 dots high and nl + n2 x 256 dots wide. Maximum width is
8 inches (480 dots). ml, m2, . . . are the dot data. each a l-byte value from
0 to 255 representing 8 vertical dots, with the most significant bit at the
top and the least significant bit at the bottom. The number of data bytes
must be nl + n2 x 256. Dots beyond the right margin are ignored. At
the end of dot graphics printing the printer returns automatically to
character mode.
Print b-bit double-density graphics
Mode ASCII Decimal Hexadecimal
<ESC>
"L" nl n2
27 76
nl n2
1B 4C
nl n2
Both
ml m2 ml m2 ml m2
Prints 8-bit dot graphics at 120 dots per inch horizontally (maximum 960
dots wide). See < ESC > "K" for other information.
Print b-bit double-density, double-speed graphics
Mode
ASCII Decimal Hexadecimal
<ESC>
"Y" nl n2
27 89
nl n2
1B 59
nl n2
Both
ml m2 ml m2 ml m2
Prints 8-bit dot graphics at 120 dots per inch horizontally (maximum 960
dots wide), skipping every second dot in the horizontal direction. See
< ESC > "K" for other information.
Print 8-bit quadruple-density graphics
Mode ASCII Decimal Hexadecimal
<ESC>
"z" nl n2
27 90
nl n2
IB 5A nl
n2
Both
ml m2 ml m2 ml m2
Prints 8-bit dot graphics at 240 dots per inch horizontally (maximum 1920
dots wide), skipping every second dot in the horizontal direction. See
< ESC > "K" for other information.