Chapter 10: Optional Accessories; Automatic Sheet Feeder (Sf-15Ha); Pull Tractor Unit (Pt-15Ha); Serial Interface Unit (Is-8H192 And Is-32H768) - Star Micronics LC-4511 User Manual

127

Chapter 10: Optional Accessories

This chapter introduces the following optional
accessories that are available for this printer:

Automatic Sheet Feeder (SF-15HA)

Pull Tractor Unit (PT-15HA)

Serial Interface Unit (IS-8H192 and IS-32H768)

Serial-to-Parallel Converter (SPC-8K)
Important!
Always make sure that printer power is turned off
whenever installing or removing optional
accessories.
Automatic Sheet Feeder (SF-15HA)
The automatic sheet feeder automatically feeds cut
sheet paper into the printer.
Preparing the printer
Use the printer's EDS Mode to change the setting
of Bank A Switch 4 to OFF (page 47), which tells
the printer that the automatic sheet feeder is
installed.
Refer to the manual that comes with the automatic
sheet feeder for further details on installation and
operation.
Pull Tractor Unit (PT-15HA)
The pull tractor unit is recommended when printing
with multi-part continuous forms.
Refer to the manual that comes with the pull tractor
unit for further details on installation and operation.
Serial Interface Unit (IS-8H192 and IS-
32H768)
Installing the serial interface unit provides serial
data communications capabilities between the
printer and your computer.