2-1. Disassembly of the Cabinet
Carry out disassembly in the following procedure.
1. Removal of the lower case
Remove the five screws 1.
2. Removal of the battery case
(1) Remove the four screws 2 and two screws 3.
(2) Disconnect the connector CN3 from the A board.
(3) Disconnect the connector CN5 from the C board.
3. Removal of the front cover
(1) Remove the five screws 4 and two screws 5.
(2) Disconnect the connector CN1 from the A board.
BC-1WD
Section 2
Service Overview
2-1 (E)