Specifications; Specific Safety Rules - Makita DP3002 Instruction Manual

ENGLISH
1-1. Switch trigger
1-2. Lock lever
2-1. Reversing switch lever
3-1. Hook

SPECIFICATIONS

Model
Steel
Capacities
Wood
-1
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. This
tool should be grounded while in use to protect the
operator from electric shock. Use only three-wire
extension cords which have three-prong grounding-type
plugs and three-pole receptacles which accept the tool's
plug.
For Model DP3002/DP3003
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 80 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
For Model DP4000/DP4001/DP4002/DP4003
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 81 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
Explanation of general view
5-1. Side grip
5-2. Teeth
5-3. Protrusions
6-1. Sleeve
DP3002
10 mm
32 mm
) 0 - 1,200
304 mm
2.0 kg
2
.
DP3003 DP4000
0 - 900
296 mm 304 mm
1.8 kg 2.2 kg
ENE032-1
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
ENF001-1
Model;
DP3002,DP3003,DP4000,DP4001,DP4002,DP4003
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37/EC.
000087
ENG003-2
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
ENG003-2
1. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
3
6-2. Ring
7-1. Chuck key
8-1. Depth gauge
DP4001 DP4002
13 mm
38 mm
308 mm 304 mm
2.0 kg 2.2 kg
/II
2
.
Yasuhiko Kanzaki CE2005
Director
DP4003
0 - 600
308 mm
2.0 kg
ENH101-5
GEB001-2