Using The Instrument For The First Time; Inserting The Batteries; Setting The Date And Time; Taking A Blood Pressure Measurement Using This Instrument - SAN-UP BP 3ABO-H Instruction Manual

2. Using the Instrument for the First Time

Inserting the batteries

After you have unpacked your device, rst insert the batteries.
The battery compartment 4 is at the back of the device. Insert
the batteries (4 x size AA 1,5 V), thereby observing the indicated
polarity.

Setting the date and time

1. After the new batteries are
AO
the display. You can set the year by pressing the M-button
and then set the month, press the time button AP.
To
2. You can now set the month using the M-button. Press the
time button to
3. Please follow the instructions above to set the day, hour and
minutes.
4. Once you have set the minutes and pressed the time button,
the date and time are set and the time is displayed.
5. If you want to change the date and time, press and hold the
time button down for approx. 3 seconds until the year number
starts Now you can enter the new values as described
above.
BP 3ABO-H
d, the year number ashes in
and then set the day.
3. Taking a Blood Pressure Measurement using this
Instrument
Checklist for taking a reliable measurement
1. Avoid activity, eating or smoking immediately before the
measurement.
2. Sit down for at least 5 minutes before the measurement
.
and relax.
3. Always measure on the same arm (normally left).
4. Remove close
To avoid constriction, shirt sleeves should not be rolled
up - they do not interfere with the
garments from the upper arm.
if they are laid
EN
5