AudioCodes MediaPack 124 Quick Setup Manual page 6

5. Open the IP Settings table (Configuration tab > VoIP menu > Network > IP Interfaces Table).
6. Modify the IP address to suit your network addressing scheme:
In the 'IP Address' field, enter the new IPv4 IP address in dotted-decimal notation.

In the 'Subnet Mask' field, enter the new subnet mask in dotted-decimal notation.

In the 'Default Gateway Address' field, enter the new IP address of the Default Gateway in dotted-

decimal notation.
7. Click Submit to apply your settings.
8. Open the Maintenance Actions page (Maintenance tab > Maintenance menu > Maintenance Actions),
and then click BURN to save your settings to the device's flash memory. This process also causes the
device to reset.
As you have changed the device's IP address, your connection to the device's management interface
through your browser is no longer available.
9. Disconnect the device's Ethernet cable from your computer and then connect it to your network.
10. Access the device's management interface using the device's new IP address.
6 | P a g e