Technical Data - Viessmann 92889 Operation Manual

1.3 Checking the package contents
Check the contents of the package for completeness:
- LED-lamp with patented base socket
- Fixation ring
- Manual
2. Introduction
This lamp produces by SMD-LED the light which is suitable to the
lamp model. Low heat build-up and power input. Nearly unlimited
lifetime of the LED, so no more change is required.
3. Mounting
- Remove the lamp carefully from the package.
- Check function before mounting.
- Drill a hole (Ø 4 mm) at the mounting place (see fig. 1).
- Put the cables from outside through the hole and push the
socket into the hole. If necessary, fix the lamp with the fixa-
tion ring from inside (optional).
Caution:
Never touch the mast but only the patented base socket (fig. 3).
4. Connection
Caution:
Resistor and diode at the cables are needed for proper
function of the lamp. Never cut them off!
Never cover resistor or diode with insulation material,
because they have to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm
length below the lamp, so that you can pull and reverse the lamp
from the mounting hole in any work.
Connect the LED-lamp to the lighting power output of a model
train transformer (e. g. item-No. 5200) or power supply as
shown in fig. 4 and/or 5.
DC voltage: Connect the diode (red part with black mark)
with the plus pole of the power supply, the resistor with the
minus pole.
AC voltage: Operation with AC voltage could cause some flickering.
We recommend to use the Viessmann power module, item-No.
5215, which is sufficient for approx. 100 LED-lamps or -reflectors
(fig. 5). Connect the cable to the diode with the brown output socket,
the resistor with the red output socket of the power module.
5. Warranty
Each model is tested to its full functionality prior to delivery.
The warranty period is 2 years starting from the date of pur-
chase. Should a fault occur during this period please contact
our service department (service@viessmann-modell.com).
Please send the item to the Viessmann service department for
checking and repair only after consultation. If we find a materi-
al or production fault to be the cause of the failure the item will
be repaired free of charge or replaced. Expressively excluded
from any warranty claims and liability are damages of the item
and consequential damages due to inappropriate handling,
disregarding the instructions of this manual, inappropriate use
of the model, unauthorized disassembling, construction modifi-
cations and use of force, overheating and similar.

6. Technical data

Operating voltage: 10 – 16 V AC ~
Operating current: ca. 10 mA
The latest version of the manual can be looked up at the
Viessmann homepage entering the item-No
4
(with and without 5215 power modul)
14 – 24 V DC =
13 – 24 V digital signal
Do not dispose this product through
(unsorted) general trash, but supply it to
the recycling.
Viessmann
Modelltechnik GmbH
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
www.viessmann-modell.de
.
Stand 07/sw
01/2017
92889
Ho/Me