Download Print this page

Operational Instructions - Stamina VERSA-BELL PRO Owner's Manual

50lb adjustable dumbell

Advertisement

Part No. and Description
1
Weight Tray
2
Weight Plate (5 lbs)
3
Handle
4
Hand Grip
5
Support Guide
6
Left Slider
7
Right Slider
8
Threaded Bar
9
Securing Block

OPERATIONAL INSTRUCTIONS

VERSA-BELL PRO has a internal slider system that allows the user to adjust the weights on both sides of the bar.
Follow the following process to adjust and work out with your VERSA-BELL PRO :
1.
While in the Weight Tray, turn the SELECT KNOBS(10) to
adjust, one turn for one Weight Plate. To increase the weight,
turn the SELECT KNOBS(10) clockwise. To decrease the
weight, turn the SELECT KNOBS(10) counterclockwise.
The Weight Number Windows at each end of the hand grip
display the amount of weight selected on each end of the
VERSA-BELL PRO.
2.
Lift the VERSA-BELL PRO approximately 6 inches from the
Weight Tray and check the Weight Plates.
CAUTION: Never adjust the SELECT KNOBS(10) when
the VERSA-BELL PRO is removed from the Weight Tray.
3.
Start to work out if the Weight Plates are secure.
We recommend that you keep the VERSA-BELL PRO balanced as closely as possible. For example, if three weights
are used, use two on one side and one on the other side. The illustrations below show the proper setup for 10, 20, 30,
40, and 50 pounds.
10 LBS
No Plate
This product is warranted to be free from defects in material and workmanship and to be in perfect working order at the
time of purchase. This warranty applies to personal, family or household use. This warranty does not apply to use in
athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities.
If the product should, for any reason, become defective within 90 days of purchase, the manufacturer will replace the
product once it is returned to the manufacturer. This warranty does not apply to any damage caused by accident,
return transit, alteration, abuse, or misuse. There are no other warranties other than those expressly set forth herein.
Products shipped to the manufacturer must be in the original shipping carton with freight prepaid. All expenses for
repairing or replacing the product, including the cost of shipping it back to the original purchaser, will be covered by the
manufacturer. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Qty
1
8
1
1
2
1
1
2
2
20 LBS
One Plate
on each side
LIMITED WARRANTY
Part No. and Description
Weight Number
Windows
Select Knob
30 LBS
Two Plates
on each side
10
Select Knob
11
Spring
12
Steel Ball
13
Bolt, Socket Head(M6x1x7mm)
14
Bolt, Socket Head(M6x1x20mm)
15
Bolt, Socket Head(M6x1x35mm)
16
Decal
17
Grip Ring
18
Manual (not pictured)
40 LBS
Three Plates
on each side
Qty
2
2
2
8
2
4
2
2
1
50 LBS
Four Plates
on each side

Advertisement

loading