Electrolux ESF6768KXA User Manual page 26

26 electrolux.com.au
TROUBLESHOOTING
Error codes, cause and solution
Error code
F1
F2
F3
F5
F6
F7
F8
F9
FE
(CONTINUED)
Possible cause and solution
Overfill
Not draining
Inlet valve faulty
Inadequate water supply
Faulty heater sensor
Over temperature
Heating error
Diverter valve faulty
Power supply problem
Control
• Power off your machine and close the tap.
• Contact the customers services centre.
• Water discharge hose is clogged.
• Water drainage hose kinked, check installation.
• The filters of your machine might be clogged.
• Power off–on your machine and activate the
program cancellation command.
• If the error continues, contact the Customer
Care Centre.
• Close the tap.
• Contact the Customer Care Centre.
• Make sure the water tap is fully open and that
there is mains water available.
• Water inlet hose kinked, check installation.
• Close the water tap, disconnect the hose from
the tap and clean the filter at the connection.
• Restart your machine, contact the service if the
error resumes.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.